Drvna industrija, Vol. 66 No. 1, 2015.
Izvorni znanstveni članak
https://doi.org/10.5552/drind.2015.1369
Impact of Wood Species, Dimensions and Drying Temperature on Sorption Behaviour of Wood
Darius Albrektas
; Tehnološko sveučilište u Kaunasu, Odjel za inženjerstvo materijala, Kaunas, Litva
Kristina Ukvalbergienė
; Tehnološko sveučilište u Kaunasu, Odjel za inženjerstvo materijala, Kaunas, Litva
Sažetak
This research paper examines the interdependence between wood sorption properties and its dimensions, species and drying temperature. The research was carried out on specimens of six species of wood (oak, ash, aspen, birch, spruce and pine) which had different dimensions and were dried at temperatures ranging between 30 and 90 °C. Subsequently specimens underwent the moistening and air drying process, and the following parameters were recorded: moistening and drying rate, moisture content distribution, steady moisture content and sorption hysteresis. It was established that sorption hysteresis was most affected by the cross section dimensions of the specimen. It was determined that, when the thickness of wood specimens increases from 7 to 30 mm, sorption hysteresis grows up to 8 times. The steady moisture content depends on the density, measurements and drying temperature of the specimen.
Ključne riječi
drying temperature; adsorption; desorption; moisture content; sorption hysteresis; water vapour
Hrčak ID:
136835
URI
Datum izdavanja:
31.3.2015.
Posjeta: 2.844 *