Skoči na glavni sadržaj

Stručni rad

Differential method of estimation of soil resistance characteristic according to the results of the pile tests

Yuri Tugаenko ; Odessa State Academy of Civil Engineering and Architecture, Odessa, Ukraine
Anatloy Tkalich ; Odessa State Academy of Civil Engineering and Architecture, Odessa, Ukraine
Michael Marchenko ; Odessa State Academy of Civil Engineering and Architecture, Odessa, Ukraine
Ludmila Loginova ; Odessa State Academy of Civil Engineering and Architecture, Odessa, Ukraine


Puni tekst: engleski pdf 1.037 Kb

str. 180-185

preuzimanja: 378

citiraj


Sažetak

Piles testing for determination of their bearing capacity performs by applying a load with measurement of the value of settlement on its head. By standard pile test, it is impossible to determine the value of shear resistance along the shaft of a pile and a compression below its toe. The new test procedure allows to determine the values of these characteristics. Tests were performed using equipment for standard pile tests. The essence of the developed method is to use the elastic properties of the soil and pile material to estimate characteristics of soil resistance. For this purpose, instead of the stepwise-increasing method was applied cyclically increasing load. Each stage represents an independent cycle, consisting of the load application, holding it up to the stabilization of strains and unloading stage.

Ključne riječi

pile; load; shift; compression; structural strength

Hrčak ID:

140763

URI

https://hrcak.srce.hr/140763

Datum izdavanja:

15.6.2015.

Podaci na drugim jezicima: hrvatski

Posjeta: 907 *