Građevinar, Vol. 67 No. 08., 2015.
Pregledni rad
https://doi.org/10.14256/JCE.1361.2015
Punching strength of flat slabs with and without shear reinforcement
Marko Bartolac
Domagoj Damjanović
Ivan Duvnjak
Sažetak
The punching shear strength is an extremely significant parameter for the design of flat slabs, i.e. the slabs supported directly on columns, without beams between columns. Slab punching design models are presented according to Eurocode 2, ACI Code 318, and fib Model Code 2010. The authors’ own experimental research on the punching shear of slabs with and without shear reinforcement is described, and the results are compared with predictions given in the mentioned design models. It was established that all design models underestimate the experimentally obtained shear strength in the case of slabs without shear reinforcement. As to slabs with shear reinforcement, it was observed that the shear strength determined according to Eurocode 2 is overestimated.
Ključne riječi
flat slabs; punching; reinforced concrete; shear reinforcement; codes; experiment
Hrčak ID:
144672
URI
Datum izdavanja:
11.9.2015.
Posjeta: 32.314 *