Izvorni znanstveni članak

Magnetic field distribution in the electromagnetic feeding riser of rectangle steel ingot

C. J. Xu ; School of Materials and Metallurgy, University of Science and Technology Liaoning, China
Y. X. Zeng ; School of Materials and Metallurgy, University of Science and Technology Liaoning, China
Z. L. Wang ; Zhongyuan Special Steel Co. Ltd., Jiyuan, China
J. Li ; School of Materials and Metallurgy, University of Science and Technology Liaoning, China
S. L. Li ; School of Materials and Metallurgy, University of Science and Technology Liaoning, China
X. J. Zhang ; School of Materials and Metallurgy, University of Science and Technology Liaoning, China

Sažetak

The electromagnetic feeding method was used to improve solidification quality of steel ingot, and the feeding principle of electromagnetic riser was introduced. The distribution characteristics of magnetic field in electromagnetic riser were investigated before and after pouring steel by the measures of numerical and physical simulation. The results showed that there’s a good symmetry of magnetic field distribution in electromagnetic feeding riser before pouring steel, but both symmetry and uniformity of magnetic field distribution are broken after pouring steel into riser, and magnetic induction intensity of the surface is higher than that of the inner of feeding riser.

Ključne riječi

steel ingot; solidification; magnetic field distribution; feeding riser; numerical simulation

Hrčak ID:

157374

URI

https://hrcak.srce.hr/157374

Datum izdavanja:

1.10.2016.

Posjeta: 1.587 *