Skoči na glavni sadržaj

Izvorni znanstveni članak

The analysis of the plastic deformation of two-layered magnesium – aluminium alloys (AZ31 – Al)

R. Mola ; Kielce University of Technology, Poland
S. Mróz ; Częstochowa University of Technology, Poland
P. Szota ; Częstochowa University of Technology, Poland
S. Sawicki ; Częstochowa University of Technology, Poland


Puni tekst: engleski pdf 180 Kb

str. 625-627

preuzimanja: 586

citiraj


Sažetak

The paper presents the results of physical modelling of the plastic deformation of the two-layered AZ31 - Al alloys. The AZ31 - Al feedstock was produced using the diffusion bonding method. Heating under pressure led to the formation of a continuous layer of the intermetallic phases at the bond interface of AZ31 - Al. A compression test was used to determine the plastic deformation of the two-layered AZ31 - Al alloys. Based on the analysis of the investigation results it has been found that, as the strain rate decreases and temperature increases, the intermetallic phase yields, and a distinct thinning of the intermetallic phase layer has occurred in the zone directly affected by the anvil.

Ključne riječi

magnesium – aluminium alloys; microstructure; plastic deformation; diffusion bonding; physical modelling

Hrčak ID:

157382

URI

https://hrcak.srce.hr/157382

Datum izdavanja:

1.10.2016.

Posjeta: 978 *