Prethodno priopćenje

Influence of induction hardening parameters on the GS30Mn5 weld properties

V. Marušić ; Faculty of Mechanical Engineering in Slavonski Brod, University of Osijek, Croatia
I. Samardžić ; Faculty of Mechanical Engineering in Slavonski Brod, University of Osijek, Croatia
I. Opačak ; Faculty of Mechanical Engineering in Slavonski Brod, University of Osijek, Croatia
L. Marušić ; Technical Department of the College of Slavonski Brod, Croatia

Sažetak

This study examines parameters of post-weld heat treatment on the test specimens made of cast steel GS30Mn5. The welding is performed with shielded metal arc welding (SMAW) process. The aim is to obtain the surface without illicit cracks, with hardness ranging from 320 up to 400 HB. After induction heating, the specimens are cooled alternately with air and water. Decreased speed of quenching results in avoiding the occurrence of illicit splashes, while the hardness is maintained within the prescribed limits.

Ključne riječi

welding; GS30Mn5; post weld heat treatment; mechanical properties; structure

Hrčak ID:

157436

URI

https://hrcak.srce.hr/157436

Datum izdavanja:

1.10.2016.

Posjeta: 2.436 *