Izvorni znanstveni članak

Low and high frequency fatigue tests of nodular cast irons

A. Vaško ; University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Žilina, Slovak Republic
J. Belan ; University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Žilina, Slovak Republic
L. Kuchariková ; University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Žilina, Slovak Republic
E. Tillová ; University of Žilina, Faculty of Mechanical Engineering, Department of Materials Engineering, Žilina, Slovak Republic

Sažetak

The paper deals with the comparison of fatigue properties of nodular cast iron at low and high frequency cyclic loading. The specimens from three melts of nodular cast iron with different microstructure and mechanical properties were used for experiments. Fatigue tests were carried out at low and high frequency sinusoidal cyclic push-pull loading (stress ratio R = –1) at ambient temperature (T = 20 ± 5 °C). Low frequency fatigue tests were carried out using the fatigue experimental machine Zwick/Roell Amsler 150HFP 5100 at frequency f ≈ 120 Hz; high frequency fatigue tests were carried out using the ultrasonic fatigue testing device KAUP-ZU at frequency f ≈ 20 kHz.

Ključne riječi

nodular cast iron; fatigue test; microstructure; mechanical properties

Hrčak ID:

168845

URI

https://hrcak.srce.hr/168845

Datum izdavanja:

2.1.2017.

Posjeta: 1.887 *