Skoči na glavni sadržaj

Stručni rad

THE ESTIMATION OF EFFICIENCY OF THE LADLES HEATING PROCESS

Mariusz Wnęk orcid id orcid.org/0000-0003-2485-7765 ; Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, Katowice, Poland
Maciej Rozpondek ; Katowice School of Technology, Poland


Puni tekst: engleski pdf 377 Kb

str. 59-64

preuzimanja: 1.008

citiraj


Sažetak

The paper presents a system of drying and heating the metallurgical ladles. The ladle heating parameters significantly affect the metallurgical processes. The heating process target of the ceramic ladle lining can reduce the steel temperature in the furnace. It resulted in reduction of energy consumption what is an economic benefit. Adopted drying and heating rate of the ladle depends on the ladle refractory lining - an alkaline or an aluminosilicate. The temperature field uniformity of ceramic lining is a basic technological requirement. The presented industrial research shows the way of the ladle heating where the self-recuperative burner was used. The recuperative burner application gives the rapid increasing of the preheated air temperature what has resulted in the reduction of fuel consumption for the same thermal power. The examinations of the two ladles heating process were presented and the energy efficiency of that process was identified.

Ključne riječi

ladle; self-recuperative burner; heating; energy reduction

Hrčak ID:

168854

URI

https://hrcak.srce.hr/168854

Datum izdavanja:

5.11.2016.

Posjeta: 1.431 *