Tehnički vjesnik, Vol. 24 No. 1, 2017.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20130719101736
Surface quality finish in laser cutting using Taguchi design
Vinay Sharma
; Department of Production Engineering, Birla Institute of Technology, Mesra, Ranchi, India - 835215
Somnath Chattopadhyaya
; Department of ME & MME, IndianInstitute of Technology (Indian School of Mines), Dhanbad, India - 835215
Sergej Hloch
; Faculty of Manufacturing Technologies of Technical, Universtity of Košice with a seat in Prešov, Bayerova 1, 080 01 Prešov, Slovak Republic
Sažetak
The present work aims at obtaining parametric combination to achieve the best surface finish and assess effects of selected process parameters on a laser cut quality for laser cutting. This helps to study the variation in response parameter (Ra value) for various levels of selected process parameters. In the present work mild steel specimen is used and the effect of the key parameters such as laser pulse frequency (pulse repetition rate), laser pulse width and cutting speed on surface finish are critically analysed. For experimental design and parametric analysis robust design is used i.e. a fractional factorial experimental design with an appropriate orthogonal array followed by variance and sound to noise ratio analysis.
Ključne riječi
cutting speed; factorial design; laser pulse width; orthogonal array; pulse repetition rate (PRR) or pulse frequency
Hrčak ID:
174695
URI
Datum izdavanja:
10.2.2017.
Posjeta: 3.133 *