Izvorni znanstveni članak
https://doi.org/10.24138/jcomss.v11i4.96
The Influence of Digital Modulations on 320 Gbit/s Optical Time Division Multiplexing
Lukas Koci
; Department of Telecommunications, Brno University of Technology, Brno, Czech Republic
Petr Munster
; Department of Telecommunications, Brno University of Technology, Brno, Czech Republic
Tomas Horvath
orcid.org/0000-0001-8659-8645
; Department of Telecommunications, Brno University of Technology, Brno, Czech Republic
Milan Cucka
; Department of Telecommunications, Brno University of Technology, Brno, Czech Republic
Miloslav Filka
; Department of Telecommunications, Brno University of Technology, Brno, Czech Republic
Sažetak
In this article the optical time division multiplexing technique for high speed point-to-point optical networks is discussed. We performed test of influence of selected types modulation formats in the optical time division multiplexing simulation model with a distance of 30 km. Additionally, this paper focuses on maximum bandwidth usage, improvement of bit error rate and the another goal is to achieve the maximal transmission distance by using of special compensation optical fiber. Optimal length of compensation optical fiber was found and used during simulations. We demonstrated positive influence compensation optical fiber on bit error rate. For comparison of modulation formats such as return-to-zero, non-return-tozero,chirped-return-to-zero, carrier-suppressed-return-to-zero, and m-ary quadrature amplitude modulation were tested. Our results confirm that it is possible to achieve better bit error rate for selected modulation formats.
Ključne riječi
OTDM; RZ; NRZ; CRZ; m-QAM; modulation; BER
Hrčak ID:
180011
URI
Datum izdavanja:
21.12.2015.
Posjeta: 1.139 *