Izvorni znanstveni članak
https://doi.org/10.17559/TV-20140422230704
Developing of wear model of construction materials in abrasive soil pulp employing discriminant analysis
Jerzy Napiorkowski
; University of Warmia and Mazury, Department of Vehicle and Machine Construction and Operation, 11 Oczapowskiego street, 10-719 Olsztyn, Poland
Pawel Mikolajczak
; University of Warmia and Mazury, Department of Vehicle and Machine Construction and Operation, 11 Oczapowskiego street, 10-719 Olsztyn, Poland
Stanislaw Legutko
orcid.org/0000-0001-8973-5035
; Faculty of Mechanical Engineering and Management, Poznan University of Technology, 3 Piotrowo street, 60-965 Poznan, Poland
Jolanta B. Krolczyk
; Faculty of Mechanical Engineering, Opole University of Technology, 5 Mikolajczyka street, 45-271 Opole, Poland
Sažetak
This paper presents a method of selecting the chemical composition and structure of the surface layer of construction materials to suit the property of the abrasive soil pulp being processed. The experiment was conducted in a laboratory, by the "rotating mass" method. The mathematical model developed for the experiment enables simulation of the wear changes of the construction materials used in soil, depending on changing of chemical composition and structure of the construction material and soil humidity. The results produced in the experiment have shown that the wear intensity in gravel soil may be acceptable for both materials containing less than 20 % C+Cr (used in soil with humidity of more than 12 %) and in tribological unfavourable conditions (soil humidity below 6 %), if the C+Cr content in the construction material exceeds 25 %.
Ključne riječi
abrasive soil pulp; discriminant analysis; microstructure; wear
Hrčak ID:
181236
URI
Datum izdavanja:
10.5.2017.
Posjeta: 2.129 *