Izvorni znanstveni članak
https://doi.org/10.17559/TV-20150513074103
Numerical simulation of dissimilar weld joint in SYSWELD simulation software
Radoslav Koňár
; University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering, Univerzitná 1, 010 26 Žilina, Slovakia
Marek Patek
; University of Žilina, Faculty of Mechanical Engineering, Department of Technological Engineering, Univerzitná 1, 010 26 Žilina, Slovakia
Sažetak
Dissimilar weld joints are prone to frequent failures caused by many factors. Several methods might be used for prediction of the failures, from which prediction of the residual stresses and weld joint hardness plays a very important role. During the construction design, there is a possibility to predict residual stress by welding numerical simulation that may serve as the failure prevention. In presented article, residual stresses of dissimilar X5CrNi18-10/S355J2H weld joint were predicted by SYSWELD software after optimization of welding process by experimentally obtained thermal behaviour. The hardness wizard tool of the programme was employed for prediction of the weld joint hardness.
Ključne riječi
dissimilar weld; hardness prediction; residual stress; SYSWELD; temperature field
Hrčak ID:
181251
URI
Datum izdavanja:
10.5.2017.
Posjeta: 3.801 *