Izvorni znanstveni članak

https://doi.org/10.21278/TOF.41206

Characterization of Friction Surfaced Coatings of AISI 316 Tool over High-Speed-Steel Substrate

Ravi Kumar ; Mechanical Engineering Department, IIT (ISM), Dhanbad, Jharkhand, IndiaMechanical Engineering Department, B.T.Kumaon Institute of Technology Dwarahat, Almora, Uttarakhand, India
Somnath Chattopadhyaya ; Mechanical Engineering Department, IIT (ISM), Dhanbad, Jharkhand, India
Aniruddha Ghosh ; Mechanical Engineering Department, GCETT Berhrampore, West Bengal, India
Grzegorz M. Krolczyk ; Faculty of Mechanical Engineering, Opole University of Technology, Opole, Poland
Pedro Vilaca ; Facuty of Department of Engineering Design & Production, Aalto University, Aalto, Finland
Ratnesh Kumar ; Mechanical Engineering Department, IIT (ISM), Dhanbad, Jharkhand, IndiaMechanical Engineering Department, NIT Jamshedpur, Jharkhand, India
Madhulika Srivastava ; Mechanical Engineering Department, IIT (ISM), Dhanbad, Jharkhand, India
Mohammad Shariq ; Mechanical Engineering Department, IIT (ISM), Dhanbad, Jharkhand, India
Rupam Triphathi ; Mechanical Engineering Department, IIT (ISM), Dhanbad, Jharkhand, India

Sažetak

Nowadays friction surfacing (FS) has become a popular solid state surface coating technology suitable for a range of substrates. The technology has the ability to produce coatings with marginal dilution and good metallurgical bonding. The present study has aimed at producing a single-track and a three-track overlapping coatings on high-speed steel substrates using an AISI 316 consumable rod. Microhardness of coatings was examined by a Vickers micro hardness tester. Coatings of all the friction surfaced samples in as-deposited condition showed significant hardness. The infrared thermography showed that the peak temperature achieved by the AISI 316 coating was about 1020 ͦ C. The coatings, thus attained, were further analysed for their microstructural features and interfacial characteristics by using FE-SEM. The EDX analysis showed the presence of nickel, chromium and oxygen, which indicates the formation of oxide compounds. The formation of AISI 316 deposits on the HSS substrate and the effect of coating overlapping are discussed in this article.

Ključne riječi

Friction surfacing; overlapping coatings; micro hardness; infrared thermography; AISI 316; Field Emission Scanning Electron Microscopy (FE-SEM)

Hrčak ID:

183702

URI

https://hrcak.srce.hr/183702

Datum izdavanja:

24.7.2017.

Posjeta: 2.211 *