Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.17559/TV-20160422094400

Analysis of the wormwheel toothing accuracy

Tadeusz Nieszporek ; Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Rafał Gołębski ; Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Lubomir Šooš orcid id orcid.org/0000-0003-3161-5609 ; Slovak University of Technology in Bratislava, Mechanical Engineering Faculty, Namiestie Slobody 17, 812 31 Bratislava, Slovak Republic


Puni tekst: hrvatski pdf 1.161 Kb

str. 993-1000

preuzimanja: 616

citiraj

Puni tekst: engleski pdf 1.161 Kb

str. 993-1000

preuzimanja: 414

citiraj


Sažetak

The article presents a mathematical model for the determination of the tooth surface of the wormwheel machined by either the tangential or the radial method. Wormwheel machining with a special hob and a modular hob is considered. Different methods of solving the task are presented. This includes also a numerical method that requires the envelope condition to be solved. The described discussion is general in nature. The tool action surface, built based on the worm mating with the wormwheel in the worm gear, may have an arbitrary profile. In the technological gear, made up by the tool and the wormwheel, the rotary motion of the wormwheel was exchanged for its rectilinear motion. The tool positioning errors in the machining process were taken into account.

Ključne riječi

envelope method; worm gear; wormwheel

Hrčak ID:

185439

URI

https://hrcak.srce.hr/185439

Datum izdavanja:

31.7.2017.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.806 *