Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.17559/TV-20150923165859

Resistance assessment of beam-to-column joints with different blind bolt systems

Anka Javora orcid id orcid.org/0000-0002-9424-5468 ; Ministry of Construction and Physical Planning, Ulica Republike Austrije 20, 10000 Zagreb, Croatia
Davor Skejić ; University of Zagreb, Faculty of Civil Engineering, Department for Structures, Fra Andrije Kacica-Miosica 26, 10000 Zagreb, Croatia


Puni tekst: hrvatski pdf 2.429 Kb

str. 1103-1112

preuzimanja: 671

citiraj

Puni tekst: engleski pdf 2.429 Kb

str. 1103-1112

preuzimanja: 386

citiraj


Sažetak

Blind bolted connections enable simple joining of various beams to tubular columns. In the parametric analysis several different blind bolts systems were compared through the example of I-beam-to-hollow section column joint with extended endplate. 1155 combinations of parameters defining behaviour of considered joint type were analysed. The size of a bolthole or more precisely blind bolt geometry has major effect on joint resistance. The most common failure mode is bending of the column flange. In the cases where the thickness of the endplate is lower than or equal to the thickness of the column wall, endplate most frequently fails by bending. Obviously the use of an elliptical yield line mechanism and appreciation of the membrane action effect increase the joint resistance. It is suggested to investigate further the membrane action effect with the use of elliptical yield line mechanism especially in the region where the failure mode changes.

Ključne riječi

blind bolts; beam-to-hollow section column joint; elliptical yield line pattern; membrane action; parametric analysis

Hrčak ID:

185448

URI

https://hrcak.srce.hr/185448

Datum izdavanja:

31.7.2017.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.897 *