Skoči na glavni sadržaj

Stručni rad

https://doi.org/10.17559/TV-20150527101851

Reliability design of the casting machines under high pressure

Eleonora Desnica orcid id orcid.org/0000-0002-4724-5764 ; University of Novi Sad, Technical Faculty "Mihajlo Pupin", Đure Đakovića bb, 23000 Zrenjanin, Republic of Serbia
Ivica Nikolić ; EDUCONS University, Faculty of Business in Service, Vojvode Putnika 87, 21208 Sremska Kamenica, Republic of Serbia
Vladimir Trninić ; FAM SEČANJ AI d.o.o., Partizanski put bb., 23240 Sečanj, Republic of Serbia
Mirjana Bojanić ; University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovica 6, 21000 Novi Sad, Republic of Serbia


Puni tekst: hrvatski pdf 785 Kb

str. 1277-1282

preuzimanja: 897

citiraj

Puni tekst: engleski pdf 785 Kb

str. 1277-1282

preuzimanja: 467

citiraj


Sažetak

The basic aim of this paper is to estimate possible hazards at casting machines under high pressure in production conditions, by failure modes and effect analysis (FMEA) method. Providing high reliability, safeness and quality in the use of any technical system (TS), is a complex task for designers, engineers, technologists in the process of production and maintenance. The example, shown in the paper (casting machines under high pressure), can be used for the analysis of the reliability in the design phase and in the exploitation period of many processes in the machine industry. For this purpose an "adjusted" (simplified) procedure for failure analysis has been developed. Analysis was conducted in the production conditions in the factory FAM Secanj, Serbia. In the paper, we evaluated the failure at four casting machines by using FMEA method and by using FMEA Worksheets according to standard SRPS EN 60812:2011. Based on the RPN value (Risk Priority Number) certain corrective actions have been implemented. By application of these actions, it is possible to predict the maintenance procedures of the system in order to provide the required reliability during operation of the system.

Ključne riječi

casting machines under high pressure; FMEA; reliability design; RPN (Risk Priority Number)

Hrčak ID:

185458

URI

https://hrcak.srce.hr/185458

Datum izdavanja:

31.7.2017.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.796 *