Izvorni znanstveni članak

Mechanical clinching process stress and strain in the clinching of EN-AW5754 (AlMg3), and EN AW-5019 (AlMg5) metal plates

J. Cumin ; Mechanical Engineering Faculty, Slavonski Brod, University of Osijek, Croatia
I. Samardžić ; Mechanical Engineering Faculty, Slavonski Brod, University of Osijek, Croatia
M. Dunđer ; Department for Polytechnics, University of Rijeka, Croatia

Sažetak

This paper presents the results of Finite Element Method numerical simulation performed onEN-AW5754(AlMg3), EN AW-5019 (AlMg5) plates subjected to mechanical clinching. The goal was to observe differences between aluminum plates in the same tool; and to determine the possibility of using the constructed tool for the clinching of Al-Al material combinations. This tool construction is to be produced and tested in laboratory conditions, to elaborate prospective results, and reach additional conclusions.

Ključne riječi

AlMg alloy, mechanical clinching, mathematical model, plates

Hrčak ID:

189376

URI

https://hrcak.srce.hr/189376

Posjeta: 1.320 *