Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.15255/CABEQ.2016.1055b

Recovery of Acrylic Acid Using Calcium Peroxide Nanoparticles: Synthesis, Characterisation, Batch Study, Equilibrium, and Kinetics

B. S. De ; Advanced Separation and Analytical Laboratory (ASAL), Department of Chemical Engineering, Visvesvaraya National Institute of Technology (VNIT), Nagpur (M.S) 440010, India
K. L. Wasewar orcid id orcid.org/0000-0001-7453-6308 ; Advanced Separation and Analytical Laboratory (ASAL), Department of Chemical Engineering, Visvesvaraya National Institute of Technology (VNIT), Nagpur (M.S) 440010, India
V. R. Dhongde ; Advanced Separation and Analytical Laboratory (ASAL), Department of Chemical Engineering, Visvesvaraya National Institute of Technology (VNIT), Nagpur (M.S) 440010, India
S. S. Madan ; Advanced Separation and Analytical Laboratory (ASAL), Department of Chemical Engineering, Visvesvaraya National Institute of Technology (VNIT), Nagpur (M.S) 440010, India
A. V. Gomase ; Department of Fibres and Textile Processing Technology, Institute of Chemical Engineering (ICT), Mumbai (M.S) 400019, India


Puni tekst: engleski pdf 1.328 Kb

str. 29-39

preuzimanja: 812

citiraj


Sažetak

Recovery of acrylic acid from aqueous solution using low-cost CaO2 nanoparticles was investigated. CaO2 nanoparticles were synthesized by co-precipitation technique and characterised using XRD and FTIR. A mechanism was proposed for adsorption of acrylic acid onto CaO2 nanoparticles based on FTIR analysis. Acrylic acid recovery is highly dependent on contact time, CaO2 nanoparticle dosage, initial acrylic concentration, and temperature. Langmuir, Freundlich, Dubinin-Radushkevich, Tempkin, Hill, Redlich-Peterson, Sips and Toth isotherms were used and well represented by Redlich-Peterson
isotherm (R2 = 0.9998) as compared to other isotherms. Kinetic studies revealed pseudo-second-order kinetics (k2 = 1.962·10–4 g mg–1 min–1) for adsorption of acrylic acid onto CaO2 nanoparticles. CaO2 nanoparticles exhibited high acrylic acid recovery over
varied concentration ranges. The acrylic acid can be regenerated by desorption from the surface of adsorbent and utilised for numerous applications. The presented results may be useful for the design of adsorption system using nanoparticles, which can be extended to other systems.







This work is licensed under a Creative Commons Attribution 4.0 International License.

Ključne riječi

acrylic acid; adsorption; calcium peroxide nanoparticles; equilibrium; kinetics; batch study

Hrčak ID:

197231

URI

https://hrcak.srce.hr/197231

Datum izdavanja:

29.3.2018.

Posjeta: 1.803 *