Stručni rad

https://doi.org/10.21278/TOF.42107

Five-Axis Numerical Control Machining of the Tooth Flank of a Logarithmic Spiral Bevel Gear Pinion

Tieming Xiang ; School of Mechanical & Automotive Engineering, Xiamen University of Technology. Xiamen, China
Jixiang Yi ; Engineering training centre, Xiamen University ofTechnology, China
Wuxiong Li ; School of Automotive and Machinery, Huizhou Economicsand Polytechnic College, China

Sažetak

In this paper, the production of a logarithmic spiral bevel gear prototype is illustrated by the manufacture of the gear pinion. Firstly, the conical gear body of a logarithmic spiral bevel gear pinion was shaped on a C6140A1 lathe. A kinematic model of a five-axis vertical machining centre DMG DMU40 monoBLOCK, with the position and orientation of each axis relative to the movement of the workpiece, was created. In addition, the processing coordinate transformation formula between the workpiece coordinate system and the cutter coordinate system was devised. The cutter location file was converted to the numerical control code of the DMG DMU40 monoBLOCK. Finally, the pinion of a logarithmic spiral bevel gear was machined on the DMG DMU40 monoBLOCK as a prototype to be used in further research of the logarithmic spiral bevel gear.

Ključne riječi

logarithmic spiral bevel gear; five-axis vertical machining centre; cutter path; post processor coordinate transformation; DMU40 monoBLOCK

Hrčak ID:

198192

URI

https://hrcak.srce.hr/198192

Datum izdavanja:

9.4.2018.

Posjeta: 1.601 *