Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.17559/TV-20160801140840

Accuracy Analysis of Control Point Distribution for Different Terrain Types on Photogrammetric Block

Ahmet Guntel ; Mescioglu Engineering and Consultancy Inc., Ankara, Turkey
Hakan Karabork ; Selcuk University, Faculty of Engineering, Department of Geomatics Engineering, Konya, Turkey
Lutfiye Karasaka orcid id orcid.org/0000-0002-2804-3219 ; Selcuk University, Faculty of Engineering, Department of Geomatics Engineering, Konya, Turkey


Puni tekst: engleski pdf 1.738 Kb

str. 66-74

preuzimanja: 1.755

citiraj


Sažetak

Since the digital orthoimage and orthomosaic maps have come to be used more and more as the fundamental basis for many studies, the demand for such products has been gradually increasing in the recent years. Owing to the fact that they can be produced more rapidly and cheaper than the traditional topographic maps, the orthoimage maps are currently much in demand. The production accuracy of the orthoimage maps, obtained through aerial photographs or satellite images, has been an important research topic. The number and distribution of the ground control points have a significant bearing on the accuracy of aerial triangulation. Therefore, the accuracy of the orthoimage maps, being the end products, is related to the number and distribution of the ground control points within the block. This study has aimed to study the influence of the number and distribution of ground control points and check points on the accuracy of aerial triangulation by using different GNSS/IMU systems. Five different configurations have been designed depending on the distribution of the ground control and check points within rectangular shaped blocks in different combinations and numbers. Such configurations were then tested in different types of terrain such as forest lands, residential and agricultural areas. The objective of the study was to identify the most ideal geodesic structure and the most accurate photogrammetric triangulation adjustment suitable for various different systems based on such terrain classification. The results were evaluated based on the ASPRS accuracy standards.

Ključne riječi

accuracy; aerial triangulation; bundle adjustment; GCPs distribution

Hrčak ID:

200599

URI

https://hrcak.srce.hr/200599

Datum izdavanja:

26.5.2018.

Posjeta: 2.746 *