Skoči na glavni sadržaj

Pregledni rad

https://doi.org/10.31803/tg-20180203202102

Hybrid seven-bar press mechanism: link optimization and kinetostatic analysis

M. Erkan Kütük orcid id orcid.org/0000-0002-3001-2788 ; Gaziantep University, Mechanical Engineering Department
Murat Artan ; Gaziantep University, Mechanical Engineering Department
L. Canan Dülger orcid id orcid.org/0000-0002-1167-1737 ; İzmir University of Economics, Mechanical Engineering Department


Puni tekst: engleski pdf 1.301 Kb

str. 181-187

preuzimanja: 554

citiraj


Sažetak

An optimization study with kinetostatic analysis is performed on hybrid seven-bar press mechanism. This study is based on previous studies performed on planar hybrid seven-bar linkage. Dimensional synthesis is performed, and optimum link lengths for the mechanism are found. Optimization study is performed by using genetic algorithm (GA). Genetic Algorithm Toolbox is used with Optimization Toolbox in MATLAB®. The design variables and the constraints are used during design optimization. The objective function is determined and eight precision points are used. A seven-bar linkage system with two degrees of freedom is chosen as an example. Metal stamping operation with a dwell is taken as the case study. Having completed optimization, the kinetostatic analysis is performed. All forces on the links and the crank torques are calculated on the hybrid system with the optimized link lengths.

Ključne riječi

hybrid mechanism, genetic algorithm, kinetostatic analysis, linkage optimization, mechanism synthesis, seven link press mechanism

Hrčak ID:

206055

URI

https://hrcak.srce.hr/206055

Posjeta: 946 *