Metalurgija, Vol. 58 No. 1-2, 2019.
Izvorni znanstveni članak
Investigation of hardness and surface roughness in end milling glass fibre reinforced polymer composite
M. Senthil Kumar
; Department of Aeronautical Engineering, Kumaraguru College of Technology,Coimbatore, India
Sažetak
The increase use of glass fibre reinforced polymer (GFRP) composites in recent years has led to an increased demand for machining. Milling of glass fiber reinforced polymer (GFRP) composites becomes essential in order to enhance its surface quality. In this paper, optimization of machining parameters in milling of horizontal axis wind turbine (HAWT) blade wrapped with E-glass fiber reinforced plastics (GFRP) composites with multi-response criteria-based desirability function analysis (DFA). The machining parameters such as spindle speed (A), feed rate (B) and depth of cut (C) are optimized by considering multiple response characteristics namely surface roughness (Ra) and hardness (HB). The desirability at a high of 0,83 provides minimum surface roughness about 2,64 μm 0,7 and maximum hardness about 49,12 BH.
Ključne riječi
GFRP; hardness; scanning electron microscopy (SEM); machining; wind turbine
Hrčak ID:
206509
URI
Datum izdavanja:
1.1.2019.
Posjeta: 1.539 *