Izvorni znanstveni članak

https://doi.org/10.17559/TV-20170529143820

FEM Numerical Simulations of the Mechanical Clinching Process of HC260Y Steel

Josip Cumin ; J. J. Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod Trg Ivane Brlić-Mažuranić 2, 35000 Slavonski Brod, Croatia
Antun Stoić ; J. J. Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod Trg Ivane Brlić-Mažuranić 2, 35000 Slavonski Brod, Croatia
Miroslav Duspara orcid.org/0000-0003-4249-9279 ; J. J. Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod Trg Ivane Brlić-Mažuranić 2, 35000 Slavonski Brod, Croatia
Ivan Samardžić ; J. J. Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod Trg Ivane Brlić-Mažuranić 2, 35000 Slavonski Brod, Croatia

Sažetak

This paper presents the results of FEM numerical simulations, of the HC260Y steelsheet mechanical clinching process. The starting tool parameters were chosen for the central composite design of experiments, in order to find out which tool parameters have the largest contribution to the sheet joint interlock. Assessment of the mathematical model, and analysis of variance (ANOVA) were performed within the design of experiments. This numerical analysis was done to find the most suitable tool geometry and tool work stresses, so that the tool sets for further experiments could be manufactured and results compared with numerical results.

Ključne riječi

FEM; HC260Y; mechanical clinching; numerical simulation; process parameters

Hrčak ID:

217086

URI

https://hrcak.srce.hr/217086

Datum izdavanja:

16.2.2019.

Posjeta: 2.125 *