Izvorni znanstveni članak

Thermodynamic analysis of BN, AlN AND TiN Precipitation in boron-bearing steel

W. S. Wang ; Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan, China
H. Y. Zhu orcid.org/0000-0002-4429-6793 ; Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan, China
J. Sun ; Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan, China
J. L. Lei ; School of Materials Science and Engineering, Hubei Polytechnic University, Huangshi, China
Y. Q. Duan ; Handan Iron & Steel Group Co., Ltd., Handan, China
Q. Wang ; Handan Iron & Steel Group Co., Ltd., Handan, China

Sažetak

In this paper, the precipitation behavior of BN, AlN and TiN particles in boron-bearing steel was studied based on thermodynamic calculation. During solidification process, precipitation amount of BN has a positive relationship with boron content, while has negative relationship with temperature. The binding capacity of boron and nitrogen is greater than that of aluminum and nitrogen, BN is preferentially precipitated as boron added to steel. BN particle reduces the free nitrogen content in steel and then prevents the formation of AlN particle. Combination of titanium and nitrogen element is more precedence than of boron and nitrogen element. Formation of TiN particle precedes BN particle, and the precipitation amount of BN is significantly reduced by adding titanium element to boronbearing.

Ključne riječi

B-bearing steel; Thermodynamic; BN, AlN, TiN precipitates; SEM, TEM, SIMS; cracks

Hrčak ID:

218351

URI

https://hrcak.srce.hr/218351

Datum izdavanja:

1.7.2019.

Posjeta: 1.898 *