Tehnički vjesnik, Vol. 26 No. 2, 2019.
Stručni rad
https://doi.org/10.17559/TV-20171221102308
Simulation Analysis on Flow Field and Temperature Field in Mould of Special Thick Slab Caster
Bao Yang
; School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan 114051, P. R. China
Jing Li
; School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan 114051, P. R. China
Lian-Wang Zhang
; School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan 114051, P. R. China
Yu Zhang
; Zhongyuan Special Steel Co. Ltd, Jiyuan, Henan 454650, P. R. China
Ye Cui
; Liaoning Fu-An Heavy Industry Co. Ltd, Anshan 114051, P. R. China
Chang-Jun Xu
; School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan 114051, P. R. China
Sažetak
A three-dimensional model of the thick slab continuous casting mould of 400 × 2200 mm was established. The effects of immersion depth of nozzle and casting speed on the flow field and temperature field were investigated. The high temperature distribution in mould, the thickness of narrow face solidified shell, the impact position of stream and the free surface velocity were used as the main points of analysis. Simulation and practical water modelling both exhibited the same changing trends, namely, the flow velocity of the surface increases with the distance from nozzle. The scientific basis for optimizing the flow field and temperature field in the continuous casting of special thick slab mould was acquired through calculations.
Ključne riječi
flow field; numerical simulation; special thick slab; temperature field
Hrčak ID:
219552
URI
Datum izdavanja:
24.4.2019.
Posjeta: 1.323 *