Tehnički glasnik, Vol. 13 No. 2, 2019.
Izvorni znanstveni članak
https://doi.org/10.31803/tg-20190417112619
Numerical simulation of the stress-strain state of complex-reinforced elements
Olena Krantovska
orcid.org/0000-0001-6182-7691
; Odessa State Academy of Civil Engineering and Architecture, Ditrikhson st. 4, 65029 Odesa, Ukraine
Mykola Petrov
; Odessa National Academy of Telecommunications O. S. Popov, Kovalska st. 1, 65029 Odesa, Ukraine
Liubov Ksonshkevych
; Odessa State Academy of Civil Engineering and Architecture, Ditrikhson st. 4, 65029 Odesa, Ukraine
Matija Orešković
orcid.org/0000-0001-5684-0496
; University North, Department of Civil Engineering, 48000 Koprivnica, Croatia
Sergii Synii
orcid.org/0000-0003-3913-6725
; Lutsk National Technical University, Lvivska st. 75, 43018 Lutsk, Ukraine
Nelli Іsmailovа
; Odessa National Academy of Telecommunications O. S. Popov, Kovalska st. 1, 65029 Odesa, Ukraine
Sažetak
The article describes a developed technique of a numerical simulation of the stress-strain state of complex-reinforced elements, which allows you to create models of double-span continuous. The performed experimental and theoretical studies allowed us to carry out the testing of the developed design model and to justify the reliability of the proposed numerical simulation methodology. The results of the experimental studies were compared with those of the theoretical studies. The theoretical calculus algorithm was developed by using the finite element method. Theoretical calculations were performed by using the mathematical-graphical environment software system LIRA-SOFT and the mathematical and computer program MATLAB. On the basis of the experimental research, the iso-fields of displacements and stresses in the materials of an eccentrically compressed beam with a small bend of the slab were constructed, which collapse behind the inclined narrow strip of concrete and displacements and stresses in the materials of the eccentrically stretched beam, which is destroyed due to the yield of the upper mounting armature.
Ključne riječi
deformation model; finite element modelling; LIRA-SOFT; stress-strain state
Hrčak ID:
221161
URI
Datum izdavanja:
17.6.2019.
Posjeta: 1.483 *