Skip to the main content

Original scientific paper

https://doi.org/10.21278/TOF.43202

Numerical Analysis of a Photovoltaic Module Integrated with Various Water Cooling Systems

Raheleh Nowzari ; Mechanical Engineering Department, Istanbul Aydin University, Florya, Istanbul, Turkey


Full text: english pdf 2.783 Kb

page 19-30

downloads: 826

cite


Abstract

As the main drawback of a photovoltaic module is its high operating temperature, various designs for cooling the module are presented in this study. Computational fluid dynamics (CFD) software is used for simulating the presented models. In these models, water channels are placed above or below the panel to cool the module and heat the water at the same time. In two designs, aluminium fins are attached to the bottom side of the panel inside the water channel. The water outlet temperature, pressure drop and heat flux from the panel are calculated at various Reynolds numbers. The results show that as the Reynolds number increases, the heat flux and the pressure drop increase while the coolant average outlet temperature decreases. The highest amount of heat flux is obtained from Model A, which indicates that this model has a better cooling capacity than other models investigated in the study.

Keywords

Photovoltaic panel; numerical analysis; ANSYS; cooling channels

Hrčak ID:

223162

URI

https://hrcak.srce.hr/223162

Publication date:

22.7.2019.

Visits: 1.895 *

accessibility

closePristupačnostrefresh

Ako želite spremiti trajne postavke, kliknite Spremi, ako ne - vaše će se postavke poništiti kad zatvorite preglednik.