Tehnički glasnik, Vol. 13 No. 4, 2019.
Prethodno priopćenje
https://doi.org/10.31803/tg-20191102120738
Analysis of thermomechanical properties of polymeric materials produced by a 3D printing method
Adam Gnatowski
; Czestochowa University of Technology, Department of Technology and Automation, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Rafał Gołębski*
; Czestochowa University of Technology, Department of Technology and Automation, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Piotr Sikora
; Czestochowa University of Technology, Department of Technology and Automation, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Sažetak
A comparative analysis of the thermomechanical properties of semicrystalline and amorphous polymeric materials was carried out. Samples were produced by using a 3D printing technology on the SIGNAL printer - ATMAT. The following polymeric materials were used to make the samples: TPU-thermoplastic polyurethane elastomer, ABS-copolymer acrylonitrile-butadiene-styrene, Nosewood, PET-ethylene terephthalate, PLA-poly (lactic acid). The research included a thermal analysis of the dynamic properties (DMTA) of manufactured materials.
Ključne riječi
polymer materials; thermal analysis of dynamic properties; 3D print
Hrčak ID:
229505
URI
Datum izdavanja:
11.12.2019.
Posjeta: 1.531 *