Izvorni znanstveni članak
https://doi.org/10.21278/brod71101
REDUCING WATER ENTRY IMPACT LOADS ON MARINE STRUCTURES BY SURFACE MODIFICATION
Bülent Güzel
; Department of Naval Architecture and Marine Engineering Yildiz Technical University Istanbul, Turkey, 34349
Fatih C. Korkmaz
; Department of Marine Engineering Operations Yildiz Technical University Istanbul, Turkey, 34349
Sažetak
In this study, the effect of hydrophobicity in reducing the impact forces during the water entry of complex geometries has been demonstrated on bow flare slamming and wet deck slamming. Superhydrophobic surfaces with a contact angle of 1600 and a hysteresis of 30 which shows a wetting regime in the Cassie–Baxter state were obtained via a chemical coating. By conducting drop tests with a bow flare ship section model and a catamaran section model at various impact velocities, jet flows, water pileups and air cavities were compared between the hydrophilic and hydrophobic cases via high speed camera images. The impact loads acting on the test bodies under hydrophobic effects were also compared via strain gauge measurements. The rise time of the strain values was measured shorter with smaller magnitudes in the hydrophobic cases. The modification in the jet flow propagation affects the total impact force. The results showed that hydrophobicity modifies the water uprising characteristics and energy balances, and reduces the impact loads acting on marine structures during slamming events.
Ključne riječi
Hydrophobic; water entry; slamming; impact force; bow flare; wet deck
Hrčak ID:
232065
URI
Datum izdavanja:
31.3.2020.
Posjeta: 2.964 *