Izvorni znanstveni članak

Effect of current intensity on residual stress of Q345/2Cr13 dissimilar steel plates

H. Fu ; College of Metallurgy and Energy, North China University of Science and Technology, Tangshan, Hebei, China
B. Xu ; College of Metallurgy and Energy, North China University of Science and Technology, Tangshan, Hebei, China
Q. Xiao ; Key Laboratory of metallurgical engineering, University of Science and Technology Liaoning, Anshan, Liaoning, China
S. Li ; Key Laboratory of metallurgical engineering, University of Science and Technology Liaoning, Anshan, Liaoning, China
X. Zhang ; China
S. Bian ; China
T. Kang ; 725 Research Institute of China Shipbuilding Heavy Industry Group Corporation, China

Sažetak

Based on the software Visual-Environment, Finite element method (FEM) was performed on the dissimilar butt-joint between Q345 and 2Cr13 steel aiming at the welding residual stress. The main contents in the paper were different current intensity was applied to modeling the welding process of Q345/2Cr13 dissimilar steel and the law of residual stress field were discussed. Based on the result, different current intensities have little effect on the lateral residual stress, while the longitudinal residual stress and the initial and end of the weld have a great influence. The physical properties of the dissimilar plates lead to uneven distribution of residual stress, and the current intensity should be smaller.

Ključne riječi

steel plates; dissimilar steel welding; current intensity; numerical simulation: residual stress

Hrčak ID:

232452

URI

https://hrcak.srce.hr/232452

Datum izdavanja:

1.4.2020.

Posjeta: 1.284 *