Izvorni znanstveni članak
https://doi.org/10.5552/crojfe.2020.657
Influence of Cutting Attachment on Noise Level Emitted by Brush Cutter during Tending of Young Forests
Bartłomiej Naskrent
; Poznan University of Life Sciences Department of Forest Utilisation Wojska Polskiego 71A 60-625 Poznań POLAND
Witold Grzywiński
; Poznan University of Life Sciences Department of Forest Utilisation Wojska Polskiego 71A 60-625 Poznań POLAND
Adrian Łukowski
; Poznan University of Life Sciences Department of Silviculture Wojska Polskiego 71 D 60-625 Poznań POLAND
Krzysztof Polowy
; Poznan University of Life Sciences Department of Forest Technology Wojska Polskiego 71C 60-625 Poznań POLAND
Sažetak
A brush cutter is the most frequently used equipment for tending young forests. When cutting unwanted vegetation, the operator is exposed to various harmful factors, such as: a forced body position, noise, vibrations and exhaust emissions. In this study, the impact of cutting attachment type on the noise level during tending of young pine stands was examined. The attachments used during the tests included: a wire head and cutting blades with 2, 3 and 24 cutting teeth. The research was carried out on 2–3 year old Scots pine plantations covered with three types of vegetation: herbaceous, mixed and woody. It was proven that the the wire head was the device that generated the highest level of noise. In the case of cutting blades, the number of cutting teeth was the important factor. The greater the number of teeth in the cutting blades, the lower the noise level the device produced. There was no significant influence of vegetation type on noise emission level. Based on the results, in order to minimize operators’ exposure to noise, the use of wire cutting attachment should be limited.
Ključne riječi
brush cutter; cutting device; noise; forest plantation; silviculture
Hrčak ID:
233585
URI
Datum izdavanja:
31.1.2020.
Posjeta: 1.552 *