Skoči na glavni sadržaj

Tehnički glasnik, Vol. 14 No. 1, 2020.

Izvorni znanstveni članak

https://doi.org/10.31803/tg-20191112161707

Development and Experimental Verification of a Generative CAD/FEM Model of an External Fixation Device

Elmedin Mešić orcid id orcid.org/0000-0002-3695-416X ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina
Adil Muminović ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina
Mirsad Čolić ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina
Marin Petrović orcid id orcid.org/0000-0002-4623-8597 ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina
Nedim Pervan orcid id orcid.org/0000-0001-7366-202X ; Faculty of Mechanical Engineering Sarajevo, Vilsonovo šetalište No. 9, 71000 Sarajevo, Bosnia and Herzegovina

Puni tekst: engleski pdf 1.333 Kb

str. 1-6

preuzimanja: 644

citiraj

Sažetak

This paper presents the development and experimental verification of a generative CAD/FEM model of an external bone fixation device. The generative CAD model is based on the development of a parameterized skeleton algorithm and sub-algorithms for parametric modeling and positioning of components within a fixator assembly using the CATIA CAD/CAM/CAE system. After a structural analysis performed in the same system, the FEM model was used to follow interfragmentary fracture displacements, axial displacements at the loading site, as well as principal and Von Mises stresses at the fixator connecting rod. The experimental analysis verified the results of the CAD/FEM model from an aspect of axial displacement at the load site using a material testing machine (deviation of 3.9 %) and the principal stresses in the middle of the fixator connecting rod using tensometric measurements (deviation of 3.5 %).The developed model allows a reduction of the scope of preclinical experimental investigations, prediction of the behavior of the fixator during the postoperative fracture treatment period and creation of preconditions for subsequent structural optimization of the external fixator.

Ključne riječi

external fixation device; generative CAD model; interfragmentary displacements; principal stresses

Hrčak ID:

235955

URI

https://hrcak.srce.hr/235955

Datum izdavanja:

20.3.2020.

Posjeta: 1.575 *