Prethodno priopćenje

https://doi.org/10.31803/tg-20200525213336

Additive Manufacturing of Polymer Moulds for Small-Batch Injection Moulding

Damir Godec orcid.org/0000-0003-3449-9850 ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, HR-10000 Zagreb, Croatia
Tomislav Breški orcid.org/0000-0001-8676-835X ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, HR-10000 Zagreb, Croatia
Miodrag Katalenić ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lucica 5, HR-10000 Zagreb, Croatia

Sažetak

In case of small-batch production, applications of classic technologies and tools, for e.g. injection moulding and classic moulds are not competitive. Application of additive technologies (AT) for direct production of finally parts can partially reduce deficiencies of classic approach, but there are for e.g. limited number of available materials. Potential solution is application of AT in production of so called bridge moulds for small-batch production from originally requested material for final part. This paper presents PolyJet process of AT and its possible application for production of bridge polymer moulds for injection moulding of small quantity of the moulded parts together with design rules for PolyJet bridge moulds.

Ključne riječi

3D printing; design rules; PolyJet polymer moulds; small-batch injection moulding

Hrčak ID:

239012

URI

https://hrcak.srce.hr/239012

Datum izdavanja:

11.6.2020.

Posjeta: 1.792 *