Drvna industrija, Vol. 71 No. 4, 2020.
Izvorni znanstveni članak
https://doi.org/10.5552/drvind.2020.1916
Finite Element Modeling of Fiber Reinforced Polymer-Based Wood Composites Used in Furniture Construction Considering Semi-Rigid Connections
Mustafa Zor
orcid.org/0000-0002-2115-8339
; Zonguldak Bulent Ecevit University, Caycuma Vocational School, Turkey
Murat Emre Kartal
; Izmir Democracy University, Department of Civil Engineering, Turkey
Sažetak
In this study, control samples of pine (Pinus slyvestris L.), beech (Fagus orientalis L.) and oak (Quercus petreae L.) species were obtained by using fi ber reinforced finger corner joints. Teknobont 200 epoxy and polyvinyl (PVAc) adhesives were used as glue. Bearing in mind the critical loads that may affect their use, experimental samples were tested under diagonal loads. Experimental samples were also analyzed by a computer program using the finite element method (FEM). Finally, experimental data were compared with the results of FEM. The comparisons clearly showed that experimental results and finite element solutions (SAP2000 V17) including semi-rigid connections are in good agreement. As a structural analysis program in furniture engineering designs, FEM can be preferred in terms of reliability and cost.
Ključne riječi
fiber reinforced polymer (FRP); furniture; glue; diagonal tension loading; finite element method (FEM)
Hrčak ID:
244160
URI
Datum izdavanja:
24.9.2020.
Posjeta: 2.095 *