Izvorni znanstveni članak

https://doi.org/10.21278/TOF.444016120

Wear Rate Evaluation of Sol-Gel TiO2-ZrO2 Films by Quantitative Depth Profile Analysis

Krešimir Grilec orcid.org/0000-0001-5685-5655 ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia
Lidija Ćurković orcid.org/0000-0002-3212-277X ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia
Irena Žmak orcid.org/0000-0001-7994-3615 ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia

Sažetak

Wear resistance of metallic materials can be improved by modifying their surface with different coating deposition techniques, one of which is the sol-gel technology. The sol-gel technology is simple, easy to adopt, requires low processing temperatures and leads to a high degree of purity of oxide coatings. In this paper, the erosive wear resistance of a ceramic nanostructured sol-gel TiO2-ZrO2 film consisting of three layers, deposited on a stainless steel substrate (X5CrNi18-10) by means of the dip coating technique has been studied. Quartz sand was used as an erodent with an impact angle of 30deg. Quantitative Depth Profile (QDP) analysis was used for the determination of the coating thickness and chemical composition before and after solid particle erosion. Glow Discharge Optical Emission Spectrometry (GDOES) was used for the analysis of the chemical composition of the bulk material (substrate) and the quantitative depth profiling of the deposited sol-gel film. The obtained results show that solid particle erosion of nanometric films can be monitored by depth profiling of the deposited sol-gel film.

Ključne riječi

sol-gel; TiO2-ZrO2 film; tribology; quantitative depth profiling

Hrčak ID:

247383

URI

https://hrcak.srce.hr/247383

Datum izdavanja:

22.1.2021.

Posjeta: 1.425 *