Tehnički vjesnik, Vol. 27 No. 6, 2020.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20190507160151
Anisotropic Mechanical Properties of Materials in Stereolithographic Additive Manufacturing
Alan Divjak*
; University of Zagreb, Faculty of Graphics Arts, Getaldićeva 2, 10 000 Zagreb, Croatia
Damir Modrić
; University of Zagreb, Faculty of Graphics Arts, Getaldićeva 2, 10 000 Zagreb, Croatia
Ines Kovačić
; University of Zagreb, Faculty of Graphics Arts, Getaldićeva 2, 10 000 Zagreb, Croatia
Vladimir Cviljušac
; University of Zagreb, Faculty of Graphics Arts, Getaldićeva 2, 10 000 Zagreb, Croatia
Sažetak
Rapid development and expanding deployment of additive manufacturing mark this technology as an acceptable alternative to traditional methods of production in terms of speed and quality. All types of additive manufacturing technologies build objects layer by layer, therefore anisotropy of mechanical properties is often encountered, making it difficult to accurately predict the mechanical behavior of additively manufactured parts. This paper examines the mechanical properties of additively manufactured parts and the creation of an anisotropic digital material model that can be used to accurately simulate the behavior of additively manufactured parts using FEA (Finite Element Analysis). A three-point bending test was performed on samples created using SLA (Stereolithography) technology. The identical bending scenario was computer modeled using FEA, while the modified manufacturer's data was used for digital material creation. Comparison and analysis of the experimentally obtained results and the results of the FEA were performed.
Ključne riječi
additive manufacturing; FEA; photopolymer; stereolithography
Hrčak ID:
248206
URI
Datum izdavanja:
19.12.2020.
Posjeta: 1.848 *