Izvorni znanstveni članak
https://doi.org/10.2478/aiht-2021-72-3468
Application of a new in situ calibration technique for gamma spectrometry and comparison of in situ and laboratory measurements
Davor Rašeta
; Institute for Medical Research and Occupational Health, Zagreb, Croatia
Branko Petrinec
orcid.org/0000-0001-9272-3828
; Institute for Medical Research and Occupational Health, Zagreb, Croatia
Dinko Babić
; Institute for Medical Research and Occupational Health, Zagreb, Croatia
Marko Šoštarić
; Institute for Medical Research and Occupational Health, Zagreb, Croatia
Sažetak
In situ gamma ray spectrometry was developed to quickly measure large areas of land following nuclear accidents. However, a proper calibration of detectors for in situ measurements is a long and complicated process. One tool designed to make this calibration quick is the InSiCal software. We compared 5,000 s in situ measurements with two different HPGe detectors calibrated using the InSiCal software and laboratory measurements of samples collected at the same locations. Our findings suggest that in situ gamma spectrometry using InSiCal software can provide reasonably accurate data, but some improvements are needed.
Ključne riječi
emergency; HPGe spectrometers; InSiCal software; radiation; radionuclide measurements
Hrčak ID:
253760
URI
Datum izdavanja:
16.3.2021.
Posjeta: 1.526 *