Metalurgija, Vol. 60 No. 3-4, 2021.
Izvorni znanstveni članak
Simulation study on the effect of riser heating mode on solidification of flat ingot head
S. M. Jia
; Applied Technology College, University of Science and Technology of Liaoning, Anshan City, China
L. Miao
; Applied Technology College, University of Science and Technology of Liaoning, Anshan City, China
C. J. Wu
; Sheet design quality division of manufacturing management department of Angang Steel Co., Ltd, Anshan city, Liaoning province, China
D. Xu
; College of Materials Science and Engineering, High quality Cold heading steel Technology Innovation Center of Hebei Province, Handan City, China
Sažetak
According to the production practice of 14 tons flat ingot, the influence of heat preservation measures on solidification state of ingot head is analyzed by the software ProCAST. The results show that the heating riser and electromagnetic heating riser delay the cooling of molten steel in the ingot head, but these heating risers have little effect on the temperature of the middle and lower parts of the ingot. Due to the different influence of corner heat transfer, the solidification time of molten steel in wide side is longer than that in narrow side. In comparison, the solidification time of the ingot head with electromagnetic heating riser is the longest.
Ključne riječi
flat steel ingot; exothermic riser; numerical simulation; electromagnetic heating riser
Hrčak ID:
255987
URI
Datum izdavanja:
1.7.2021.
Posjeta: 644 *