Tehnički vjesnik, Vol. 28 No. 4, 2021.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20200812021713
Preparation of Low Rolling Resistance Modified Asphalt and Analysis of Its Rolling Resistance and Viscoelasticity
Haibin Li*
; School of Architecture and Civil Engineering, Xi'an University of Science and Technology, NO. 58 Yanta North Road, Beilin district, Xi'an, Shaanxi, 710054, China
Mingming Zhang
; School of Architecture and Civil Engineering, Xi'an University of Science and Technology, NO. 58 Yanta North Road, Beilin district, Xi'an, Shaanxi, 710054, China
Wenbo Li
; School of Architecture and Civil Engineering, Xi'an University of Science and Technology, NO. 58 Yanta North Road, Beilin district, Xi'an, Shaanxi, 710054, China
Yan Li
; Xi'an Highway Research Institute, NO. 60 Gaoxin 6th Road, Gaoxin district, Xi'an, Shaanxi, 710075, China
Qinwei Ma
; Xi'an Highway Research Institute, NO. 60 Gaoxin 6th Road, Gaoxin district, Xi'an, Shaanxi, 710075, China
Guijuan Zhao
; School of Architecture and Civil Engineering, Xi'an University of Science and Technology, NO. 58 Yanta North Road, Beilin district, Xi'an, Shaanxi, 710054, China
Sažetak
R E T R A C T E D
A R T I C L E
Tire tread of running vehicles generates rolling resistance with the pavement, thereby influencing energy consumption. Thus, developing low rolling resistance pavement can improve the service function of tires. Common matrix asphalt and high module binder modifier (HMB-W) was used to obtain low rolling resistance of asphalt and effectively reduce energy consumption. Its low rolling resistance performance was analyzed via internal heat-generating test, rolling resistance test, and dynamic shear rheological test. Then, a rolling resistance model was constructed to evaluate its thermal losses. Test results show that compared with styrene-butadiene-styrene (SBS) modified asphalt and its mastic, the heat generation rates of HMB-W modified asphalt and its mastic are reduced by 14.4% and 15.5%, respectively. Thus, energy loss can be effectively reduced. The generated heat quantity and power loss were reduced by 3.7% and 5%, respectively, compared with the SBS modified asphalt. In addition, the low rolling resistance is evident. HMB-W asphalt has low-temperature sensitivity and superior high-temperature stability. Under the same stress level, the complex shear module G* of HMB-W asphalt is evidently higher than that of SBS modified asphalt. Under the same temperature condition, the energy stored is high when HMB-W asphalt goes through elastic deformation with small viscosity loss.
Ključne riječi
low rolling resistance modified asphalt; low rolling resistance model; pavement engineering; rolling resistance; viscoelasticity
Hrčak ID:
260853
URI
Datum izdavanja:
22.7.2021.
Posjeta: 1.297 *