Tehnički vjesnik, Vol. 28 No. 5, 2021.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20200714130201
Research on the Vibration Damping Performance of a Novel Single-Side Coupling Hydro-Pneumatic Suspension
Xuefeng Suo*
; Key Laboratory of Road Construction Technology and Equipment of MOE, School of Construction Machinery, Chang'an University, Middle Section of South Second Ring Road, Xi'an 710064, P. R. China
Shengjie Jiao
; Key Laboratory of Road Construction Technology and Equipment of MOE, School of Construction Machinery, Chang'an University, Middle Section of South Second Ring Road, Xi'an 710064, P. R. China
Gangfeng Wang
; Key Laboratory of Road Construction Technology and Equipment of MOE, School of Construction Machinery, Chang'an University, Middle Section of South Second Ring Road, Xi'an 710064, P. R. China
Simeng Liu
; Key Laboratory of Road Construction Technology and Equipment of MOE, School of Construction Machinery, Chang'an University, Middle Section of South Second Ring Road, Xi'an 710064, P. R. China
Zeyu Zhang
; Key Laboratory of Road Construction Technology and Equipment of MOE, School of Construction Machinery, Chang'an University, Middle Section of South Second Ring Road, Xi'an 710064, P. R. China
Sažetak
A mine dump truck is exposed to heavy load and harsh working environment. When the truck passes over the road bumps, it will cause the body to tilt and the tires to "jump off the ground" (JOTG), which will affect the stability and safety of the truck, and will cause impact damage to the body and suspension system. To avoid this situation, a kind of Novel Single-side Coupling Hydro-pneumatic Suspension (NSCHs) is presented. NSCHs consists of two cylinders in parallel, which are connected to the accumulator by rubber pipes and mounted on the same side of the dump truck. Theoretical analysis and experimental research were respectively carried out under the road and loading experimental condition. The experimental results show that compared to the conventional single cylinder hydro-pneumatic suspension, under the loading experiment condition, the maximum overshoot pressure of the NSCHs was reduced by 0.4 MPa and the impact oscillation time was shortened by 4.13 s, which plays the effective role in reducing vibration and absorbing energy. Further, it is found that the two cylinders are coupled during the working process, and the NSCHs system can achieve uniform loading and displacement compensation, thus the novel dump truck can avoid the occurrence of the JOTG phenomenon.
Ključne riječi
displacement compensation; hydro-pneumatic suspension; mine dump truck; response time; single-side coupling
Hrčak ID:
261304
URI
Datum izdavanja:
15.8.2021.
Posjeta: 786 *