Metalurgija, Vol. 61 No. 3-4, 2022.
Izvorni znanstveni članak
Effect of process factors on solidification process of 10B21 steel bloom
X. K. Yang
; Technology Innovation Center for High Quality Cold Heading Steel of Hebei Province, Hebei University of Engineering, Handan 056038, China
D. Xu
; Technology Innovation Center for High Quality Cold Heading Steel of Hebei Province, Hebei University of Engineering, Handan 056038, China; Engineering Research Center for High Toughness Wind Tower Steel of Hebei Province, Hebei Puyang Iron and Steel Corp.Ltd, Handan 056305, China
B. Zheng
; Technology Innovation Center for High Quality Cold Heading Steel of Hebei Province, Hebei University of Engineering, Handan 056038, China; School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan 114051, China
X. Yin
; Technology Innovation Center for High Quality Cold Heading Steel of Hebei Province, Hebei University of Engineering, Handan 056038, China
Sažetak
In this study, Finite Element Method (FEM) was used to simulate the solidification process of a large blank (280 mm × 325 mm) under different technological conditions. The influence of casting speed and superheat on solidification process of bloom was analyzed. It was found that as the casting speed increases, the solidification position of the bloom moved backward by 3,68 m, and the time required for complete solidification increased by 1 min; When the superheat gradually increased, the position of complete solidification of 10B21 steel bloom moved by about 1,5 m.
Ključne riječi
10B21 steel; steel bloom; temperature field; solidification; FEM
Hrčak ID:
273821
URI
Datum izdavanja:
1.7.2022.
Posjeta: 911 *