Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.17559/TV-20200926203404

Numerical and Experimental Study of Solar Dryer Equipped with PV/T

Mohamed Fterich orcid id orcid.org/0000-0003-4993-1132 ; Department of Industrial Engineering, College of Engineering, Northern Border University, Arar, Saudi Arabia
Houssam Chouikhi ; University of Sfax, National School of Engineers of Sfax, Laboratory of Electromechanical Systems (LASEM), URL, 3038 Sfax, Tunisia; Mechanical Engineering Department, College of Engineering, King Faisal University, Kingdom of Saudi Arabia
Salmen Ghorbel ; University of Sfax, National School of Engineers of Sfax, Laboratory of Electromechanical Systems (LASEM), URL, 3038 Sfax, Tunisia
Hatem Bentaher ; University of Sfax, National School of Engineers of Sfax, Laboratory of Electromechanical Systems (LASEM), URL, 3038 Sfax, Tunisia
Sadoth Sandoval-Torres ; Instituto Politécnico Nacional - CIIDIR Oaxaca. Hornos 1003, Santa Cruz Xoxocotlán, Oaxaca, Oax, CP 71230, Mexico
Aref Maalej ; University of Sfax, National School of Engineers of Sfax, Laboratory of Electromechanical Systems (LASEM), URL, 3038 Sfax, Tunisia; Department of Electrical and Electronic Engineering Science, University of Johannesburg, Johannesburg 2006, South Africa


Puni tekst: engleski pdf 1.298 Kb

str. 896-906

preuzimanja: 386

citiraj


Sažetak

Drying of agricultural food products in a solar dryer equipped with a PV/T air collector is a frequent research topic. Consequently, an experimental and numerical study has been conducted on MSD to examine the distribution of the temperature and airflow. Moreover, COMSOL Multiphysics software is used to solve a 3D temporal non-isothermal flow for the system invented. Further, the improvement of the mass flow rate dropped approximately the average PV temperature experimentally from 60 °C to 43 °C and from 63 °C to 47 °C numerically. Furthermore, the average outlet temperature of the PV/T reaches 60,5 °C in the experience and 62 °C in the simulation in the case where the mass flow rate is 0,012 kg/s, but it is dropped to 44 °C in the experience and 45 °C in the simulation for the highest mass flow rate of 0,0235 kg/s. Hence, the best recorded average thermal efficiency of the PV/T was 53% for the maximum mass flow rate (0,025 kg/s), while the average thermal efficiency of the PV/T was 29% when the mass flow rate decreased to 0,012 kg/s. Consequently, the recorded temperature in the drying chamber reaches 55 °C in the experimental data and in the simulation.

Ključne riječi

experimental; forced convection; PV/T air collector; simulation and COMSOL Multiphysics; solar dryer; solar energy

Hrčak ID:

275306

URI

https://hrcak.srce.hr/275306

Datum izdavanja:

19.4.2022.

Posjeta: 884 *