Prethodno priopćenje

https://doi.org/10.17559/TV-20210726055221

Parameter Optimization for a Potato Rod-type Conveyor Grading Device Based on the Discrete Element Method

Xing Liu ; College of Mechanical and Electric Engineering, Northwest A&F University, Yangling, Shaanxi 712100, China
Kezhou Chen ; College of Mechanical and Electric Engineering, Northwest A&F University, Yangling, Shaanxi 712100, China
Xun Wang ; College of Mechanical and Electric Engineering, Northwest A&F University, Yangling, Shaanxi 712100, China
Xin He ; College of Mechanical and Electric Engineering, Northwest A&F University, Yangling, Shaanxi 712100, China
Wei Li ; College of Mechanical and Electric Engineering, Northwest A&F University, Yangling, Shaanxi 712100, China

Sažetak

Existing field potato grading devices are complex in structure and large in volume, designing a rod-type conveyor grading device. Relying on field measurement, size and field distribution laws of mature potatoes are obtained and their field distribution is modelled. Moreover, the conveyor grading device model is established using the discrete element method (EDEM). The single-factor test and multi-factor test adopting one evaluation index (grading accuracy) and four test factors (conveyor chain elevation angle, conveyor chain speed, rod clearance, and potato feed rate) were conducted. Finally, the effects of various test factors on the evaluation index are analyzed and test factors are optimized. According to the results of this study, the rod-type conveyor grading device had a grading accuracy of 93.32%. The relative error between experimental validation and simulation results was less than 8%, suggesting that the regressive mathematical model proposed in this paper and the optimization results obtained were reasonable.

Ključne riječi

bench test; discrete element method; parameter determination; potato; simulation

Hrčak ID:

279495

URI

https://hrcak.srce.hr/279495

Datum izdavanja:

17.6.2022.

Posjeta: 1.307 *