Skoči na glavni sadržaj

Rudarsko-geološko-naftni zbornik, Vol. 37 No. 4, 2022.

Izvorni znanstveni članak

https://doi.org/10.17794/rgn.2022.4.14

COMPARATIVE ANALYSIS ON IMPACT OF WATER SATURATION ON THE PERFORMANCE OF IN-SITU COMBUSTION

Tummuri Naga Venkata Pavan orcid id orcid.org/0000-0003-4649-1442 ; Reservoir Simulation Laboratory, Petroleum Engineering Programme, Department of Ocean Engineering, Indian Institute of Technology – Madras, Chennai, India
Srinivasa Reddy Devarapu orcid id orcid.org/0000-0002-9557-4271 ; Energy Cluster, School of Engineering, University of Petroleum & Energy Studies, Dehradun
Suresh Kumar Govindarajan orcid id orcid.org/0000-0003-3833-5482 ; Reservoir Simulation Laboratory, Petroleum Engineering Programme, Department of Ocean Engineering, Indian Institute of Technology – Madras, Chennai, India

Puni tekst: engleski pdf 1.405 Kb

str. 167-175

preuzimanja: 337

citiraj

Sažetak

The amount of oil together with the water Originally in Place (OIP), makes up the liquid phase in heavy oil reservoir systems. This amount of liquid present in the pores of the reservoir system is known as liquid saturation, plays a vital role in improving oil recovery through In-Situ Combustion (ISC) process. The oil phase acts as fuel in generating thermal energy required for viscosity reduction and the water phase supports in the formation of an enlarged condensation zone that aids in higher mobility of the low viscous oil. A numerical investigation is carried out to study the role of water saturation on the performance of in-situ combustion in a heavy oil reservoir. A finite-difference based numerical model is developed and validated for water recovery. The model is then used to carry out the impact of liquid saturation on the performance of the ISC, as it plays a vital role in screening criteria for the selection of ISC. The numerical results projected a significant effect on the thermal and production profile during the process. A comparison between the effect of variation in water and oil saturations projected a significant increase in reservoir temperatures with increased water saturation than the oil saturation. The highest reservoir temperatures are observed at the maximum liquid (oil and water together) saturation. Further, the additional water drive provided by increased water saturation is observed to contribute to early production rates.

Ključne riječi

enhanced oil recovery; thermal; saturation; in-situ combustion; numerical modelling

Hrčak ID:

281527

URI

https://hrcak.srce.hr/281527

Datum izdavanja:

24.8.2022.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.087 *