Izvorni znanstveni članak

Optimization of the steel flow in the two-strand tundish using different geometry of impact pad

J. Cupek ; VSB - Technical University of Ostrava, Ostrava, Czech Republic
J. Pieprzyca orcid.org/0000-0002-7615-6082 ; Silesian University of Technology, Faculty of Material Science, Katowice, Poland
J. Walek ; VSB - Technical University of Ostrava, Ostrava, Czech Republic
M. Saternus ; Silesian University of Technology, Faculty of Material Science, Katowice, Poland
M. Tkadlečkova ; VSB - Technical University of Ostrava, Ostrava, Czech Republic
T. Merder ; Silesian University of Technology, Faculty of Material Science, Katowice, Poland

Sažetak

One of the primary factors affecting the quality of continuously cast billets is the way the steel flows and mixes in the tundish of Continuous Steel Casting (CSC) machine. This is of particular importance in the case of continuous billets. The article presents the results of model tests of identifying the mechanism of liquid steel flow through a tundish under the influence of the applied arrangement of the working space. Two models of turbulence inhibitors and an impact pad with the surface of a sphere segment were used for the research. The tests were carried out with the use of the physical water model of the CSC device, and the obtained results were verified by numerical methods.

Ključne riječi

tundish; liquid steel flow; arrangement of working space; physical water model

Hrčak ID:

290041

URI

https://hrcak.srce.hr/290041

Datum izdavanja:

3.4.2023.

Posjeta: 909 *