Izvorni znanstveni članak

Verification of non-standard f-curves during steel intermixing in a tundish

B. Buľko orcid.org/0000-0002-3507-8954 ; Technical University of Košice, Faculty of Materials, Metallurgy and Recycling, Department of Metallurgy, Košice, Slovakia
L. Fogaraš ; Technical University of Košice, Faculty of Materials, Metallurgy and Recycling, Department of Metallurgy, Košice, Slovakia
S. Hubatka ; Technical University of Košice, Faculty of Materials, Metallurgy and Recycling, Department of Metallurgy, Košice, Slovakia
P. Demeter orcid.org/0000-0003-4387-7892 ; Technical University of Košice, Faculty of Materials, Metallurgy and Recycling, Department of Metallurgy, Košice, Slovakia
K. Ondrejkovič ; ŽP VVC s.r.o., Kolkáreň 35, Podbrezová, Slovakia
P. Buček ; ŽP VVC s.r.o., Kolkáreň 35, Podbrezová, Slovakia

Sažetak

Minimization of intermixing length during continuous casting of steel is a crucial step towards higher productivity and yield of a continuous casting technology. For such a complex mass transfer problem, physical simulation using scaleddown water models might become indispensable tool to quantify the liquid steel parameters in the tundish. In this paper, such an advanced, water-based model of tundish from Železiarne Podbrezova, a. s. is used to model the intermixing process of two consecutive heats with different chemical composition. Obtaining the non-standard F-curves while manipulating the liquid level and the casting speed simultaneously gave us a valuable insight into the process of intermixing and allowed us to make preliminary conclusions on the intermixing optimization problem.

Ključne riječi

steel; continuous casting; physical simulation; tundish; flow

Hrčak ID:

290044

URI

https://hrcak.srce.hr/290044

Datum izdavanja:

3.4.2023.

Posjeta: 802 *