Skoči na glavni sadržaj

Prethodno priopćenje

https://doi.org/10.17794/rgn.2023.1.4

INVESTIGATING THE ANISOTROPY STRENGTH INDEX (ASI) FOR SOME EGYPTIAN ORNAMENTAL STONES

Ahmed M. Shohda ; Mining and Petroleum Engineering Department. Faculty of Engineering- Qena, 83513 Al-Azhar University, Egypt
Waleed M. Draz ; Mining and Petroleum Engineering Department, Faculty of Engineering, Al-Azhar University, Cairo, Egypt
Faisal A. Ali ; Mining and Petroleum Engineering Department, Faculty of Engineering, Al-Azhar University, Cairo, Egypt
Mohamed A. Yassien ; Mining and Petroleum Engineering Department, Faculty of Engineering, Al-Azhar University, Cairo, Egypt
Mahrous A.M. Ali orcid id orcid.org/0000-0001-9369-0765 ; Mining and Petroleum Engineering Department. Faculty of Engineering- Qena, 83513 Al-Azhar University, Egypt


Puni tekst: engleski pdf 3.523 Kb

str. 41-48

preuzimanja: 264

citiraj


Sažetak

The nature of ornamental stones is anisotropic. The heterogeneous characteristics of the anisotropic rocks vary with direction. The highest to lowest strength ratio is known as the anisotropy strength index (ASI). A thorough investigation of the ASI is necessary to determine the best-directed loads for these rocks. On core specimens that have been bored parallel and perpendicular to the weakness planes, this is estimated using both uniaxial compression and point load testing. For this examination, four different rock types had cores that were drilled conventionally and in line with weakness planes. The research shows that drilling cores to weakness planes at a normal or nearly normal angle (90° to 60°) yields the best, most dependable ASI. According to the current study’s findings, the ASI fluctuates depending on how uniformly the mineral content and texture of rocks are. A suggested way to calculate the ASI and the load point strength is also included. This study reveals that the employment of ornamental stone as is (for example, precipitation position is more robust and reliable than that perpendicular form) is critical in determining the resilience of this type of rock and its spatial implementation (e.g. flooring).

Ključne riječi

anisotropy strength index (ASI); uniaxial compression (UCS); point load test (PLT); ornamental stones

Hrčak ID:

295087

URI

https://hrcak.srce.hr/295087

Datum izdavanja:

7.3.2023.

Podaci na drugim jezicima: hrvatski

Posjeta: 936 *