Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.5552/drvind.2023.0048

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products

Daniel Koynov ; University of Forestry - Sofia, Faculty of Forest Industry, Department of Mechanical Technology of Wood, Sofia, Bulgaria
Miglena Valyova ; University of Forestry - Sofia, Faculty of Ecology and Landscape Architecture, Department of Plant Pathology and Chemistry, Sofia, Bulgaria
Emiliyan Parzhov ; University of Forestry, Sofia, Bulgaria
Lee Seng Hua ; Department of Wood Industry, Faculty of Applied Sciences, Universiti Teknologi MARA Pahang Branch Campus Jengka, Pahang, Malaysia


Puni tekst: engleski pdf 834 Kb

str. 71-79

preuzimanja: 165

citiraj


Sažetak

This study presents opportunities for the utilization of timber by-products with defects for manufacturing engineered wood panels. Three gluing methods were proposed for this waste raw material derived from Scots pine (Pinus sylvestris L.) wood. The methods used for combining and gluing enabled a more complete and complex utilization of wood with defects. The physical properties (density and moisture content) and mechanical properties (bending strength and modulus of elasticity) of the laboratory-fabricated engineered wood panels were evaluated in accordance with the European standards. The highest density of 643 kg/m3 and bending strength values (28.6 N/mm2) were obtained from the panels manufactured using method 3 and veneered with beech veneer sheets. The modulus of elasticity of the laboratory-made engineered wood panels reached values of up to 5580 N/mm2. This study demonstrated the feasibility of the utilization of defective wood pieces in the manufacturing of engineered wood panels.

Ključne riječi

Pinus sylvestris L.; engineered wood; knots; cross-laminated timber (CLT); solid wood panels

Hrčak ID:

296392

URI

https://hrcak.srce.hr/296392

Datum izdavanja:

25.3.2023.

Podaci na drugim jezicima: hrvatski

Posjeta: 469 *