Drvna industrija, Vol. 74 No. 1, 2023.
Izvorni znanstveni članak
https://doi.org/10.5552/drvind.2023.0087
The Influence of Different Wood Modifications on Pull-out Force of Rotary Welded Dowels
Ivica Župčić
; University of Zagreb, Faculty of Forestry and Wood Technology, Zagreb, Croatia
Igor Đukić
orcid.org/0000-0002-9546-5024
; University of Zagreb, Faculty of Forestry and Wood Technology, Zagreb, Croatia
Matija Jug
; University of Zagreb, Faculty of Forestry and Wood Technology, Zagreb, Croatia
Mario Jurišić
; University of Zagreb, Faculty of Forestry and Wood Technology, Zagreb, Croatia
Marin Hasan
orcid.org/0000-0003-0195-7464
; University of Zagreb, Faculty of Forestry and Wood Technology, Zagreb, Croatia
Sažetak
The increasing use of modified wood justifies the intention to use it in joints made by rotary welding with dowels. Thermal modification, for example, increases the dimensional stability of wood by reducing its hygroscopicity and water absorption, but it is difficult to glue or to rotary weld due to the appearance of cracks. This can be avoided by changing the optimal welding parameters, which on the other hand directly affects the reduction of the pull-out force by more than 25 % depending on the type of the modified base. In the case of welding wooden dowels into wood modified with citric acid, the reduction in pull-out force is even greater. Due to the significant reduction, the use of this type of modification for wood welding is questionable. When citric acid modification is extended to the dowels, the dowel becomes a problem due to its lower tensile strength, which is even lower than the pull-out force of the welded dowel.
Ključne riječi
rotary welding; thermal modification; modification with citric acid; pull-out force; wooden dowels
Hrčak ID:
296394
URI
Datum izdavanja:
25.3.2023.
Posjeta: 1.111 *