Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.21278/brod74208

Modified p-y curves for monopile foundation with different length-to-diameter ratio

Bin Wang ; Key Laboratory of Far-shore Wind Power Technology of Zhejiang Province, Hangzhou 311122, China, Powerchina Huadong Engineering Corporation Limited, Hangzhou 311122, China
Yuqi Jiao ; State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian 116024, China
Dongsheng Qiao ; State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian 116024, China
Shan Gao ; Key Laboratory of Far-shore Wind Power Technology of Zhejiang Province, Hangzhou 311122, China, Powerchina Huadong Engineering Corporation Limited, Hangzhou 311122, China
Tianfei Li ; Huadong Eco-Environmental Engineering Research Institute of Zhejiang Province, Hangzhou 311122, China, Powerchina Huadong Engineering Corporation Limited, Hangzhou 311122, China
Jinping Ou ; State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian 116024, China


Puni tekst: engleski pdf 1.848 Kb

str. 149-167

preuzimanja: 376

citiraj


Sažetak

The soil reaction of the monopile foundation subjected to lateral loading in offshore wind turbines is typically assessed relying on p-y curves advocated by API. However, this method is inadequate for gradually increasing monopile diameters and significantly underestimates the lateral soil confinement. In the present works, a 3D pile-soil interaction finite element model was first established, considering the soil suction and strain hardening characteristics for the normally consolidated clay in China’s sea. Modifications to the p-y curves in API were accomplished in the comparative process between the lateral soil resistance-displacement curves retrieved from the finite element model and the representative expression. Furthermore, the prediction accuracy for the corrected p-y curves has been proved by forecasting the monopile lateral bearing capacity with varying length-to-diameter ratios, which also demonstrates that the modified p-y curves could successfully reflect the lateral soil confinement of the normally consolidated clay and flexible piles. It also provides an approach to assess the deformation response and horizontal ultimate bearing capacity of monopiles with different length-to-diameter ratios.

Ključne riječi

monopile; p-y curve; length-to-diameter ratio; normally consolidated clay; finite element method

Hrčak ID:

300977

URI

https://hrcak.srce.hr/300977

Datum izdavanja:

1.3.2023.

Posjeta: 1.008 *